The latest generation of high-temperature-resistant coating materials offers much more than just heat resistance. The innovative products from our Silicotherm® series are not only recognised for their superior properties but also by their high environmental friendliness. These coatings, therefore, offer our customers significant added value.

HIGH TEMPERATURE COATINGS: for every temperature.

Silicotherm® coatings are resistant to temperature up to 700 °C and offer maximum adhesion and resistance to mechanical and chemical loads.

In addition to black, grey and silver, Silicotherm® is also available in almost all shades of red, yellow, green and blue. Our high temperature coatings Silicotherm® can be used in a wide variety of industrial applications, offering you the highest quality possible under a whole range of conditions.  
>>> Talk to us.

 

 

 

LackBox by BRANDSMART
Lacke


e.g. Silicotherm® 662M for
fireplaces, cast iron stoves, garden grills

Industrielacke


e.g. Silicotherm® 655E for
turbochargers, exhaust pipes, chimneys

Funktionslacke


e.g. 2K Thermo°Acrylic for
light fittings, spotlights, exhaust ducts

×Wetterwart-Lacke

Funktionslacke


SilicoTherm® 662M

High-temperature-resistant polyorganosiloxane coating

PRODUCT DESCRIPTION Latest generation high-temperature-resistant coating with environmentally friendly technology.

  • Excellent temperature resistance up to 600 °C with unmatched colour stability even in brilliant colours. Available in a wide range of classic and special colours.
  • Ability to cure at room temperature. Does not require additional oven drying.
  • Produces an extremely scratch and crack resistant surface capable of high mechanical and chemical loads.
  • Smoke-free and odourless on first use or first heat load.
  • Outstanding adhesion properties on steel and cast iron.
  • Environmentally friendly formulation: VOC content <200 g/L is possible.


Typical application
PRODUCT DESCRIPTION


  • Silicotherm® is an innovative, high-performance coating, temperature resistant to 600 °C for surface protection against corrosion and chemical and mechanical loads.
  • Silicotherm® 662M is the perfect solution for coating fireplaces, fireplace inserts, cast iron stoves, heating units, pipelines, exhaust systems, exhaust pipe systems, engine parts and plant construction subject to high thermal loads.
  • For corrosion requirements for ISO 12944-5 C4/C5 category environments, 662M can also be combined with high-temperature-resistant Silicotherm® zinc primer.

×Wetterwart-Lacke

Lacke


SilicoTherm® 655E Silver

Polyorganosiloxane coating

PRODUCT DESCRIPTIONA high-temperature-resistant one-coat system based on polyorganosiloxane technology for surfaces subjected to
temperatures up to 650 °C.

  • Can be used as a self-priming one-coat system, primer and topcoat applied in one single coating.
  • High-temperature resistance tested up to 650 °C, with excellent resistance to thermal shock.
  • Environmentally friendly formulation with innovative, ultra-high-solids formulation.
  • High zinc content in the dried film provides excellent corrosion protection.
  • Cures at room temperature. Smoke-free and odourless on first use.
  • Excellent adhesion on steel and cast iron.


Typical application
PRODUCT DESCRIPTION


  • Time-saving one-coat system for industrial turbochargers, engines, machinery, and plant construction subject to high thermal loads.
  • Corrosion prevention for piping, exhaust and hot air pipes, fittings, aggregates, and machine parts operating in interior or exterior areas subject to high-temperature loads.
  • A one-coat system for hot surfaces formulated for ISO 12944-5 C3-C4 category environments.

×Wetterwart-Lacke

Industrielacke


2K Thermo°Acrylic Coating

High-temperature-resistant pure acrylic coating

PRODUCT DESCRIPTION Self-priming 2-component acrylic one-coat system for surfaces exposed to thermal loads.

  • Thermal loads up to 200 °C, short-term up to 250 °C.
  • Self-priming, the primer and topcoat can be applied in one single coating.
  • Exceptional scratch, shock and impact resistance, suitable for high mechanical loads.
  • Outstanding direct adhesion to steel, cast iron, aluminium and zinc.
  • Weatherproof. High resistance to saltwater, chemicals and fuel.
  • Very good corrosion protection, suitable for C3-C5M/I category environments.
  • Light and temperature resistant pigmentation with high gloss retention.


Typical application
PRODUCT DESCRIPTION


  • Time-saving one-coat system for engines/machinery and plant construction subject to high thermal loads.
  • Corrosion prevention for exhaust and hot air pipes, fittings, aggregates and interior and exterior machinery parts subject to high-temperature loads.
  • A topcoat system for hot surfaces formulated for ISO 12944-5 C3-C5M/I category environments.

High temperature coatings:
Silicotherm®-coating systems.

Coatings can be individually formulated to suit each type of stove. Heat-resistant adhesion. Extreme scratch resistance. Unrivalled variety of colours.

 

>>> More information.